This guide assumes you have already completed the following steps:

  • Have the Zigbee Home Automation (ZHA) integration up and running.
  • Enabled multiprotocol support

Disable multiprotocol support

Step 1

Configure radio multiprotocol support
  1. Go to Settings > System > Hardware.
  2. Under Home Assistant SkyConnect, select Configure.
  3. Select the Configure IEEE 802.15.4 radio multiprotocol support option.

Step 2

Remove multiprotocol support
  1. Select Remove 802.15.4 radio multiprotocol support.
  2. Then, select the Disable multiprotocol support checkbox.
  3. Wait for the setup to complete.
  • Your Zigbee devices will continue to work. Your Thread devices will continue working only if you have another Thread border router set up.

Related topics